Anvil Shock Rack Construction Features

Anvil Portable Shock Mount Rack Shipping Cases Construction

Pre-tapped rack channel Standard E.I.A. rack spacing thoughout, with Pre-tapped 10/32 in. holes in zinc-plated steel channels Screws and gromments included Case inner shell is protected by 2 in. foam on all 4 sides Server racks may have rails with square holes For Dell and Compaq versa and rapid edge system racking 18 in. to 36 in. rack depth 2U to 30U rack height 19 in. standard rack width 23 in. telecommunications rack width available Caster boards extend out 3 in. under lids For added stability and ease of lid replacement 3/8 in. ATA outer wall – 3/8 in. ACK plywood laminated with ABS plastic – recommended for local use and 3 to 4 trips per year 3/8 in. Anvil iron outer wall – 1/4 in. ACK plywood laminated with high strength mica (polyolefin) plastic recommended for 5 to 6 trips per year 1/2 in. Anvil iron outer wall – 3/8 in. ACK plywood laminated with MICA (polyolefin) plastic recommended for 5 or more trips, large and/or deep rack cases / or whenever forklifts are often used Heavy duty wide track piano casters for easier transit over uneven surfaces like door jams and cables	Enlarge Image Anvil Shock Rack Case with Square Hole Rails for Computer Servers
Options: Legs in the lids so they can be used as portable work tables Free standing tables using one lid with two sets of table legs Rear rails Venting Heavy duty rack glides Drawers (completely customizable) Accessory compartments in the lids Slide out keyboard & instrument shelves Fixed shelves Trap doors Multiple colors at no extra charge Stenciling for identification at no charge Custom design available with no charge for design or a quote	Enlarge Image Heavy Duty Casters, Foam Surround Shell, Square Hole Rails