|
|
| CASTERS & SKIDS |
 |
Heavy Duty Casters:
Blue 3 in. wheels / ball bearings / 250 lbs. per wheel.
Super Heavy Duty Casters:
Gray 4 in. wheels / ball bearings / 350 lbs. per wheel.
Commercial Casters:
Black 6 in. wheels / ball bearings with grease fittings / 500 lbs. per wheel. |
 |
All casters are available with two or four brakes.
Although not recommended, all casters can be removable. |
| LOCKING LATCHES |
 |
Twist Hasp Latch:
A latch with a loop so that you may use a small padlock or seal to secure the case. |
| KEYBOARD SHELVES |
 |
Slide Out Keyboard Shelf:
Available with hand rest and fold-over mouse pad.
Note: Some keyboards may be too wide for a 19 in. rack mount shell but Specialty Cases can design around this problem.
Call for information. 1 (800) 267-1674 |
 |
Picture at right shows the keyboard and fold-over mouse pad in the stored position for shipping.
$120/ea |
| DRAWERS |
Built-in drawers for cables, parts, supplies, manuals, tools, laptops, etc.
Available in any height and depth; rack or bottom mounted. |
Custom |
Black
4U – $198/ea
3U – $185/ea
2U – $165/ea |
| RACK MOUNT POWER STRIPS and FANS |
Power strip, Model PD-915R $121.00/ea:
Occupies one rack-unit; common and differential surge/spike protection; EMI filtering; 8 receptacles on rear; one receptacle and on/off power switch on front panel. |
 |
 |
QFP – 1, $135.00/ea QFP – 2, $160.00/ea
Quiet one and two fan panels; square and round single fans are available. |
QFP-1 – $135/ea
QFP-2 – $160/ea |
FAN – $61/ea
QFAN – $86/ea
FAN-10 – $249/ea |
| VENTS, DOORS and LABEL PLATES |
 |
Trap Door: For special access or high security. Easy access to cables/controls, install in lids or case body, any size.
Up to 12 x 12 – $58/ea
Over 12 x 12 – Call for Quote |
 |
Aluminum Label Plate: The perfect place for affixing shipping labels.
7 1/2 x 11 in. – $22/ea |
 |
Vents: To allow the case lid to remain in place in harsh weather or when high security is required. 4 or more vents/lid are required.
4 x 4 1/2 – $25/ea
5 x 7 – $26/ea
2 1/2 x 10 1/2 – $27/ea |
| OTHER OPTIONS |
Logos and Stencils:
Block letter stencils are applied at no charge; Logos are silk screened on for a $125 set up charge. |
| General Inforamtion about Anvil Rack Cases |
Anvil rack cases are considered the standard of the shipping cases industry. Since they are custom built, these Anvil rack cases come in an infinite number of sizes and configurations. That way, our customers can get the exact case they need, rather than having to rely on limited off the shelf models.
- Anvil rack cases are manufactured and shipped from California.
- All cases are custom built to order.
- Design of the rack cases is done by Specialty Cases at no charge to met the customers’ requirements.
- All price quotations will be in writing from Specialty Cases.
- Delivery time is approximately 3 weeks ARO.
- Freight (normally truck) is prepaid and added to the Specialty Cases Invoice.
|
| How to Get a Quote |
Just call us and tell us the number of rack spaces (rack height) you need, and how deep the case needs to be (rack depth).
Our design specialist John Gump will do the rest. Call John at 1-800-267-1674 |
Sample Case Price Quotation
- Case Part Number SC16-24
- Rack Height 16U (28 in.)
- Rack Depth 24 in.
- Rear Rails
- Choice of Color
- Block Letter Stenciling
Rack Cases Options Include:
- 4 heavy-duty 4 in. casters – 2 with brakes
- 4 plate-mounted key locks – 2 per lid
- Table legs in front lid (the lid attaches to either side of the case)
|
 |
1/4 in. Wall ATA construction – recommended for 4 – 5 trips per year
$1,150 FOB California
3/8 in. Anvil Iron construction – recommended for heavy shipping and use by forklifts
$1,375 FOB California
Special Rack case options and features
For a no-obligation quote and more information on Anvil rack cases, call our design specialist John Gump at 1-800-267-1674
|
|
